9 Signs You Have a Broken Washing Machine – And How to Fix It


Did you know an average person does about 50-150 loads of laundry annually? Since washing machines are a fundamental part of every modern home, an unexpected automatic spin cycle or embedding of your favorite shirt in your machine can throw your planned day off track.

To keep your washing machine in good working order, it’s important to notice any warning signs that indicate that it has been broken. If you haven’t tried fixing your washing machine, you might have to call a professional after the water leaks from the washer. However, most washing machine issues are easy to fix. 

Let’s look at the top signs and how to fix your broken washing machine before getting the help of a professional.

1. The Laundry is Still Dirty

If your laundry is still dirty after you run your washing machine, there may be something wrong. Check the washing machine’s filter. If it’s clogged, it could be the reason your laundry is still dirty.

There are lots of particles in our laundry that clog the filter over time. Make sure to remove all the dirt that clogs the filter and try again to see if it works.

You should also check the washing machine’s tub. It could be letting dirty water back into your laundry if it’s cracked or damaged. Try running your washing machine with water to see if that fixes the problem.

Washing machine breakdowns can be a lot of stress. To learn more about the repairs, click the following link. If your washing machine is still broken, you may need to replace it. 

2. Water Is Not Draining

If your machine leaves wet clothes at the end of a cycle, it is a sign that the water is not draining correctly. Additionally, if you notice water pooling around your machine or water leaks, it is another sign that your machine is not draining correctly. 

Make sure to check the pump to see if it’s clogged. You should also check the hoses to see if they’re kinked or blocked.

Another place to check is the drain to see if it’s clogged. If there are clogs, you may need to clean them. If all of these things are fine, your washing machine is probably broken, and you’ll need to call an expert.

3. Hearing Squeaky Sounds

If you start hearing a squeaky sound from your washing machine, the most likely culprit is that some parts inside the machine have become loose and are beginning to rub against each other. To fix this, you’ll need to open up the machine and tighten any loose screws or bolts. 

You should also check the belts to see if they need some replacement. If the belts are fine, then the next thing to check is the motor. If the motor is making a noise, you may need to replace it.

4. Loud Banging Sounds

The most likely culprit is a broken washing machine drum. To fix this, you’ll need to replace the drum. You can do this yourself if you’re handy with tools.

If the banging sounds come from the washer’s spin cycle, it could signify that the bearings are going out. In this case, you’ll need to replace the bearings. 

5. Code Errors

Code errors can come from various things but usually indicate something is wrong with the washing machine’s motor or sensors. If you see a code error on your washing machine, it’s best to call an expert to diagnose the problem. However, if you’re handy with tools, you may be able to fix the problem yourself. 

Each error code corresponds to a different problem. It is best to consult your owner’s manual to determine what the code means and how to fix the problem.

Some common error codes include E1, E2, and E3. These codes indicate that there is a problem with the water supply, the drain, or the electrical supply. If you see these codes, it is best to call a professional for washing machine repairs.

6. Water Can’t Fill the Drum

The inlet hose may be clogged if your washing machine’s drum can’t fill up with water. To check this, ensure that the water supply valve is turned on. Then, disconnect the inlet hose from the back of the machine and check to see if there’s any debris blocking it.

If the hose is clogged, you can try flushing it out with a hose or a plunger. If that doesn’t work, you may need to replace the hose altogether.

Furthermore, if your washing machine still has trouble filling the drum, the pump may have problems. A more severe problem will require you to call a professional.

7. Spin Cycle Not Spinning

You might overload the drum if your washing machine’s spin cycle is not spinning. To fix this, redistribute the laundry in the drum to be more balanced.

Another possibility is that something is blocking the machine’s drain pump. Check the drain pump for any debris or blockages that might be causing the issue.

Furthermore, the machine’s drive belt could be worn out or broken. You’ll need to replace the drive belt if this is the case.

8. Machine Won’t Start

It may be because the door isn’t closed or there’s no power going to the machine. If it is not open, but there’s still no power, you may have a tripped circuit breaker or blown a fuse. You’ll need to reset the breaker or replace the fuse.

If your machine starts but stops abruptly, this could be due to a faulty lid switch. Replacing the switch should fix the problem. 

9. Your Utility Bills Have Skyrocketed

One way to fix this is to check the seals and gaskets on your washing machine. These can wear out over time, causing your washing machine to use more energy.

Another way to fix this is to clean your washing machine. Over time, soap scum and dirt can build up on your washing machine, making it less efficient.

Learn the Best Ways To Deal With a Broken Washing Machine

If your washing machine isn’t working correctly, there are some signs you can look for to determine if it’s broken. These include water not draining properly, clothes not getting clean, or the machine making strange noises.

If you think you have a broken washing machine, you can try some simple troubleshooting steps to see if you can fix it yourself. If not, you’ll need to call a professional.

Have you found what you’re looking for? If you need more tips, visit our blog today and never miss out!

Leave a Reply